1700mm High Gloss White MDF Front Bath Panel

This 1700mm high gloss white MDF front bath panel is suitable for straight baths with a length of 1700mm. This MDF bath panel can be trimmed to size if the available space for the bath panel has been reduced; i.e. due to tiling. This high gloss white MDF bath panel is supplied in 2 pieces (main panel & plinth) allowing the height to be adjusted between 480mm - 550mm. This panel should ideally be fastened to existing timber battens with screws or magnetic fixings (not supplied).

Please note: whilst this product is moisture resistant it is NOT waterproof. Any raw material exposed at cut edges MUST be sealed against moisture ingress; i.e. by applying PVA glue and allowing to cure before final installation. The entire panel should be protected by applying a thin, continuous bead of silicone around all outside edges when fitted. Please ensure all fitting and product care instructions supplied are observed. 

Front bath panel sold separately; please see below for coordinating front panels.