700mm High Gloss White MDF End Bath Panel For L Shape Square Shower Baths

This 700mm high gloss white MDF end bath panel is suitable for L shape square shower baths. This MDF bath panel can be trimmed where the available space for the bath panel has been reduced; i.e. due to tiling. This high gloss white MDF bath panel is supplied in 2 pieces (main panel & plinth) allowing the height to be adjusted between 480mm - 550mm. This panel should ideally be fastened to existing timber battens with screws or magnetic fixings (not supplied).

Please note: whilst this product is moisture resistant it is NOT waterproof. Any raw material exposed at cut edges MUST be sealed against moisture ingress; i.e. by applying PVA glue and allowing to cure before final installation. The entire panel should be protected by applying a thin, continuous bead of silicone around all outside edges when fitted. Please ensure all fitting and product care instructions supplied are observed. 

Matching front bath panel sold separately; please see below for coordinating front panel.